Digester Cover Equipments
Gas Control Equipments
Waste Gas Bruners/Flares
Flame Arrester - Detonation Arresters
       
DIGESTER COVER EQUIPMENTS    
     

TP1100M - Pressure/Vacuum Relief Valve

 
AKTEK Model TP1100M is designed to vent to atmosphere to protect your tank from damage created by over-pressure or excessive vacuum. Costly product evaporation losses due to normal tank "breathing" are greatly reduced. Because the Model TP1100M retains toxic vapours, atmospheric contamination is minimized. This helps to provide increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 12"
    • Pressure settings 2,0 mbar to 1034 mbar
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, fiberglass and other materials
    • Modular construction
       
aktek biogas
       

TP1200M - Pressure/Vacuum Relief Valve w/Pipe-Away

 
AKTEK Model TP1200M is used for pressure and vacuum relief where vapours must be piped away. Special pallets in the Model TP1200M housing virtually eliminate the intake of air and the escape of vapours except during normal tank breathing, thus reducing the loss of product and protecting the tank from possible damage. Escaping vapors are piped away through a flanged outlet connection. This helps to provide increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 12"
    • Pressure settings 2,0 mbar to 1034 mbar
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, and other materials
    • Modular construction
       
biogas control
       

TP2100M - Pressure Relief Valve w/Pipe-Away Feature

 
AKTEK Model TP2100M relief valves are designed with inlet and outlet flanges of the same size to reduce installation costs by having smaller downstream piping. Model TP12200M valves are designed for systems requiring only pressure relief. Escaping vapours are piped away through a flanged outlet connection. This helps to provide increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 4"
    • "Cushioned air" seating
    • Non-sticking design
    • Center and peripheral pallet guiding
    • Set pressure tolerance
       
       

TP3300M - Vacuum Relief Valve, Top Mount

 
AKTEK Model TP3300M Vacuum Relief Valve is used when vacuum relief is the only requirement. Intake relief necessary under working conditions is achieved by a spring or weight loaded pallet. This feature of the Model TP3300M reduces the
possibility of tank damage. The Model TP3300M helps to provide increased fire
protection and safety.

  • Product Features
  • • Sizes 2" through 12"
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, and other materials
    • Modular construction
       
       

TP3200M - Vacuum Relief Valve, Side Mount

 
AKTEK Model TP3200M Vacuum Relief Valve is used when vacuum relief is the only requirement. The Model TP3200M may be side mounted on the tank body or piped in. Intake relief necessary under working conditions is achieved by a spring or weight loaded pallet in the valve housing. The Model TP3200M reduces the possibility of tank damage and provides increased fire protection and safety.

  • Product Features
  • • Sizes 3" through 14"
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, fiberglass, and other materials

       
biogas control
       

TP1250M - Pressure/Vacuum Relief Valve w/Pipe-Away Feature and same-size inlet and outlet

AKTEK Series TP1000M relief valves are designed with inlet and outlet flanges of the same size to reduce installation costs by having smaller downstream piping. Model TP1250M valves are designed for systems requiring pressure and vacuum relief. Escaping vapors are piped away through a flanged outlet connection, helping to provide increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 4"
  • • "Cushioned air" seating
  • • Non-sticking design
  • • Center and peripheral pallet guiding
  • • Set pressure tolerance
       
       

TP2150M - Pressure Relief Valve w/Pipe-Away Feature and same-size inlet and outlet

Series TP2100M relief valves are designed with inlet and outlet flanges of the same size to reduce installation costs by having smaller downstream piping. Model TP2150M valves are designed for systems requiring only pressure relief. Escaping vapors are piped away through a flanged outlet connection. This helps to provide increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 4"
  • • "Cushioned air" seating
  • • Non-sticking design
  • • Center and peripheral pallet guiding
  • • Set pressure tolerance
       
       

TP11100M - Gauge Hatch - Locked Down Hinged Cover

 
AKTEK Model TP11100M Gauge Hatch provides access for gauging or
obtaining product samples from storage tanks. The Model TP11100M also provides pressure relief as emergency venting.

  • Product Features
  • • Sizes 4" through 10"
    • Constructed in aluminium, carbon steel, stainless steel, and additional materials
    • Available in free lift or lock downcover
    • Designed to assure uniform seating


       
       

TP7100M - Roof Manhole Cover

 
AKTEK Model TP7100M Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened hinged cover.

  • Product Features
  • • Sizes 12", 16", 20", 24", 30", 36" and 48"
    • Easy access to storage tanks for maintenance and inspection
    • ANSI, API, DIN, and other connection types available
    • Threaded clamping handle provides gas-tight and water-tight seal
    • Maximum working pressure of 200 mbar (12"-24"sizes), 69 mbar (30", 36" and 48" sizes)
    • Materials of construction include: Aluminium, Steel, 316 SS
       
       

TP151000M - Pressure/Vacuum Relief Valve and Flame Arrester w/Safety Diverter Valve

The Model TP151000M is a pair of AKTEK Model TP9100M assemblies (which consist of the TP1100M Pressure Vacuum Relief Valve and the TP8100M Flame Arrester in series) mounted to a three-way safety diverter valve to allow for maintenance. See the TP9100M literature for technical information.







       
       

TP9100M - Pressure/Vacuum Relief Valve and Flame Arrester

   
AKTEK Model TP9100M is a combination of the TP1100M / TP1200M Pressure Vacuum Relief Valve and AKTEK Model TP8100M Flame Arrester. The superior Buna-N seating diaphragms are standard on the valve to insure extra tight sealing to prevent sludge vapors escaping. Self draining housing body and drip rings protect seating surface from condensate and freezing. The Model TP1100M / Model TP8100M or Model TP1200M / Model TP8100M helps protect your tank from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition. The result is reduced emissions level and increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 12"
    • Pressure settings 2,0 mbar to 1034 mbar
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, and other materials
    • Factory Mutual approved most sizes and materials of flame element
    • Proven spiral wound, crimped ribbon, flame element
    • In non-biogas applications, this product is designated 11000/11600
    • Approvals: CE Approved
       
       

TP9100M - Pressure/Vacuum Relief Valve and Flame Arrester w/Pipe-Away

 
AKTEK Model TP9100M is a combination of the TP1100M / TP1200M Pressure Vacuum Relief Valve and AKTEK Model TP8100M Flame Arrester. The superior Buna-N seating diaphragms are standard on the valve to insure extra tight sealing to prevent sludge vapors escaping. Self draining housing body and drip rings protect seating surface from condensate and freezing. The Model TP1100M / Model TP8100M or Model TP1200M / Model TP8100M helps protect your tank from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition. The result is reduced emissions level and increased fire protection and safety.

  • Product Features
  • • Sizes 2" through 12"
    • Pressure settings 2,0 mbar to 1034 mbar
    • Vacuum settings 2,0 mbar to 827 mbar
    • Available in aluminium, carbon steel, stainless steel, and other materials
    • Factory Mutual approved most sizes and materials of flame element
    • Proven spiral wound, crimped ribbon, flame element
    • In non-biogas applications, this product is designated 11000/11600
    • Approvals: CE Approved